Pulse GSM Gateway Manuel d'utilisateur télécharger pdf (Page 30)

Table of Parameters 3.2

Signaling

Line reversal indication for call in progress Function No.: -

Select call in progress signaling by telephone line polarity reversal. There is

voltage of reversed polarity on the telephone line during the whole call.

Setting options: YES/NO

Default setting: NO

Tariff pulse when call starts/ends Function No.: -

Signaling of call start or end by tariff pulse.

Setting options: None -EasyGate doesn't send tariff pulse as signaling

of call start/end.

Call end -EasyGate sends tariff pulse when call ends.

Call start -EasyGate sends tariff pulse when call

starts.

Call start and end -EasyGate sends tariff pulse when

call starts and ends too.

Default setting: None

Tariff pulse frequency Function No.: -

Tariff pulse frequency setting.

Setting options: 16 kHz -EasyGate transmits 16 kHz tariff pulses

12 kHz -EasyGate transmits 12 kHz tariff pulses

Default setting: 16 kHz

Tone settings

Dial tone – Double frequency tone[Hz] Function No.: -

Set for double frequency tones

Setting options: YES/NO

Default setting: NO

Dial tone – frequency [Hz] Function No.: -

Setting of frequency/frequencies of dial tone.

Setting options: 5-1275 Hz

Setting step: 5 Hz

Default setting: 425 Hz

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 68 69

Pas de commentaire

Pulse GSM Gateway Manuel d'utilisateur Page 30